Need help?Do you have a question about the Bose F1 812P and is the answer not in the manual?
General| LF Driver Size | 12 inches |
|---|---|
| HF Driver Size | 1 inch |
| Weight | 44.5 lbs (20.2 kg) |
| Outputs | XLR |
| Enclosure Material | Polypropylene |
| Adjustable Array | Yes |
| Power Output | 1000 W |
| Inputs | XLR-1/4” combo |
Explains the F1 Model 812P as a full range loudspeaker with flexible coverage pattern control.
Lists the main technological advantages and specifications of the loudspeaker system.
Details the items included in the loudspeaker's packaging, such as the unit and installation guide.
Explains how to adjust the loudspeaker's coverage pattern by moving the array sections.
Lists optional mounting accessories available for the loudspeaker system.
Details how to mount the loudspeaker on a tripod stand and relevant safety warnings.
Provides detailed physical measurements of the loudspeaker in various views (Top, Bottom, Left, Front, Right, Back).
Guidelines for selecting an appropriate amplifier size based on power and impedance.
Information on required DSP for infrasonic protection and amplifier power limiting functions.
Guidance on recommended EQ settings for each of the four coverage patterns.
Illustrates the connections and layout of the loudspeaker's input panel, including barrier strip and Speakon connectors.
Comprehensive technical data including system performance, drivers, and physical attributes.
Important notes and safety warnings related to part lists and potential hazards.
Lists parts included in the loudspeaker packaging with item numbers, descriptions, and quantities.
Lists parts for speaker grilles and the stand mount interface.
Lists components related to the woofer baffle and drivers.
Lists various parts that constitute the loudspeaker's cabinet structure.
Details components for the flexible array section of the loudspeaker.
Lists electronic components for the crossover PCB assembly.
Step-by-step guide for removing the loudspeaker's foot.
Instructions for safely removing the front grille sections.
Steps to remove the Bose logo from the center grille section.
Procedure for detaching the side grilles from the loudspeaker enclosure.
Instructions on how to remove the Twiddler driver from the baffle.
Steps for detaching the stand mount interface from the speaker base.
Detailed procedure for accessing and removing the woofer assembly.
Guide for removing the input panel and the crossover PCB assembly.
Lists required test equipment and explains test cable connection information.
Procedure to check for air leaks around gaskets and joints in the loudspeaker.
Method to identify buzzing, rattling, or other extraneous noises from the speaker components.
Steps for performing frequency sweeps to test speaker performance and identify noises.
Records changes made to the service manual across different revision levels.
To Next Page