What to do if the disc does not play on Bose Lifestyle 38?
After pressing the CD/DVD button, wait a few seconds before pressing Play. Make sure the disc is properly inserted (label side up). Eject the disc and try loading it again.
How to minimize noisy FM sound in surround mode on Bose Home Theater System?
Weak FM stations may produce static in the surround speakers. Select the 2-speaker mode in the Settings menu to minimize noise.
How to fix distorted FM sound on my Bose Lifestyle 38?
Adjust the antenna position to reduce interference.
Why is there no sound from my Bose Lifestyle 38 Home Theater System?
First, increase the volume. If that doesn't work, check if MUTE is lit on the display and, if so, press the Mute button on the remote control. Also, ensure the power switch on the Acoustimass module is set to ON (I). Verify the audio input cable connector is firmly seated in the media center Main Speaker jack and the multi-pin connector is firmly seated in the Acoustimass module AUDIO INPUT jack. Check the connections between the cube speakers and the module. Turn the media center off for 60 seconds, then on again. Check the connections for any external components and ensure you've selected the correct remote button for the source. For CD/DVD, ensure the disc is correctly placed, label-side up, and connect the FM and AM antennas.
Why are the surround speakers too loud on my Bose Home Theater System?
Decrease the Surround setting for the source being played. Make sure that the left and right front speakers are connected to the front speaker jacks (blue) and the left and right surround speakers are connected to the surround speaker jacks (orange).
Why does my Bose Lifestyle 38 turn on by itself?
Change the house code setting to prevent signals from conflicting with another nearby LIFESTYLE® system.
Why does the radio not work on my Bose Lifestyle 38?
Make sure the antennas are properly connected. Move the AM antenna at least 20 inches (50 cm) from the media center. Adjust the antenna position to improve reception. Ensure the AM antenna is in an upright position. Move antennas farther from the media center, TV, or other electronic equipment. Select another station, as you may be in an area of weak signal coverage.
How to fix a Bose Lifestyle 38 that doesn’t do anything?
Ensure the power connector is securely inserted into the media center, the power cord is securely inserted into the Acoustimass® module, and the power pack and power cord are fully plugged into operating AC wall outlets. Press a source button (CD/DVD, AM/FM, etc.) on the LIFESTYLE® remote control. Unplug the media center power supply for 60 seconds, then reconnect it to reset the unit.
Why is my Bose Receiver interfering with my wireless phone?
If your Bose Receiver is causing interference with a wireless (5.8GHz) phone, try increasing the distance between each SL2 unit and the phone. If your phone has a channel button, press it to select a different channel for phone transmissions.
How to fix a blinking red light on my Bose Receiver?
If the Status LED is blinking red on either the SL2 transmitter or receiver of your Bose system, start by disconnecting the unit from the AC power outlet. Ensure there are no obstructions to ventilation and reposition the unit upright, providing clear space around the ventilation openings. If ventilation was blocked, allow the unit to cool for a few minutes before reconnecting it to the power outlet. Check the cable connection between the SL2 receiver and the surround speakers to ensure the connections are secure and the cable wires are not touching each other. If the issue persists, unplug the unit and contact Bose Customer Service.
General| RMS rated power | - W |
|---|---|
| Audio output channels | 5.1 channels |
| Audio formats supported | MP3 |
| Disc types supported | CD, DVD, DVD-R |
| Optical disc player type | DVD player |
| Weight | 4100 g |
| Dimensions (WxDxH) | 399 x 292 x 94 mm |
| Power requirements | 230V |
| Surround speaker weight | 1100 g |
| Surround speaker dimensions (WxHxD) | 78 x 157 x 102 mm |
| FM antenna | Yes |
| Audio (L/R) in | 5 |
| Digital audio coaxial in | 1 |
| Cord length | 1.8 m |
| Supported batteries | 4x AAA |
| Product color | Silver |
| Package weight | 33000 g |
Weight and Dimensions| Subwoofer weight | 11900 g |
|---|---|
| Center speaker weight | 1070 g |
| Subwoofer dimensions (WxDxH) | 203 x 330 x 549 mm |
| Center speaker dimensions (WxDxH) | 159 x 1052 x 79 mm |
Advises users to read the guide, avoid moisture, and use care with liquids to prevent hazards.
Provides a step-by-step guide on how to store CDs into the system for playback.
Explains how the uMusic system learns preferences and plays music automatically.
Details the importance and use of presets for personalizing music listening preferences.
Details how to turn the system on/off and manage audio volume using the remote.
Explains how to select different audio/video sources and inputs using the remote.
Describes how to navigate menus, select programs, and control playback using remote buttons.
Explains how to adjust selections and control playback features like pause, skip, and repeat.
Explains the function of the media center's light indicators and its physical control buttons.
Guides users on how to activate component video or progressive scan for optimal video output.
Details how to turn on the system and control other connected components for seamless operation.
Explains video connection requirements and settings for component video and progressive scan.
Explains the basic steps to play music stored in the system using the uMusic feature.
Details various control options for managing playback of stored music tracks.
Details how to provide feedback for learning and create custom playlists for music playback.
Provides step-by-step instructions for loading and starting a DVD for playback.
Details how to pause, resume, stop, skip, and repeat DVD playback.
Provides step-by-step instructions for loading and playing audio CDs.
Details how to pause, resume, stop, scan, and repeat CD playback.
Explains how to use the LIFESTYLE remote to control TVs, VCRs, and cable/satellite boxes.
Guides users on setting up the remote to control their TV, including input selection.
Details how to identify the TV brand and select the correct device code for remote control.
Explains how to make quick adjustments to enhance program enjoyment for each audio/video source.
Guides users on navigating menus and using selection buttons to make changes to source settings.
To Next Page
