10
Installation
pro.Bose.com
5.
Place the loudspeaker on the bracket.
6. Tilt the loudspeaker to the desired angle and insert the second M8 cap screw on each side of the loudspeaker.
Wall mount pitch angles Ceiling mount pitch angles
5.6 Nm (50 in-lb)
7. Using a 5 mm Allen wrench, tighten all four cap screws to 5.6 Newton-meters (50 inch-pounds).
8. Connect field wiring and test loudspeaker operation.
SB-8 suspension bracket (for indoor use only)
The SB-8 suspension bracket kit is used for suspension-mounting one 802 loudspeaker. The kit provides 0-45 deg pitch.
To Next Page
Loading...
