Bose Panaray 802 Series IV - Panaray 402 Series IV Loudspeaker Mounting Options

11
Installation
pro.Bose.com
WBP-8 wall bracket (for indoor use only)
Panaray
®
402
®
Series IV loudspeaker mounting options
RMUBRKT1 and WBPWR-50 pan-and-tilt bracket kit
M8 x 20 mm (4)
For Panaray
®
402
®
loudspeakers
M8 x 45 mm (4)
For other
loudspeakers
Flat washers (4)
Note: The RMUBRKT1 pan-and-tilt bracket is intended for indoor use only. For outdoor applications, use the WBPWR-50 pan-
and-tilt bracket
1. Remove the lower carriage bolt and separate the front and rear halves of the bracket.
Note: To mount the loudspeaker horizontally, remove the speaker plate, rotate it 90 degrees, and reattach it.
Speaker plate
Lower carriage bolt