Bose Panaray MSA12X User Manual

Panaray® MSA12X
Modular Steerable Array Loudspeaker
Design Guide

Bose Panaray MSA12X Specifications

General

Frequency Response (+/-3 dB)	75 Hz - 16 kHz
Nominal Impedance	8 Ω
Transducers	12 x 2.25"
Mounting Options	wall mount
Net Weight	9.0 kg (19.8 lb)

Summary

Modeler Properties and Operation

Beam Tab for Beam Shaping

Specifying beam type and parameters like steering and spreading in Modeler.

User Interface for Beam Shaping

Basic Steer/Spread Interface

Using the Modeler interface to adjust basic beam steering and spreading angles.

CSD Properties and Operation

MSA12X Control Panel and Settings

Navigating the MSA12X control panel, configuring input and EQ settings.

Beam Gain and EQ Adjustment in CSD

Adjusting beam gain and beam EQ parameters within the CSD control panel.

CSD Workflow: Initial Setup

Initial setup steps for MSA12X in CSD, including network connection.

Dante Endpoint Association and Routing

Linking MSA12X to ESP and routing Dante audio signals.

Dante Subscription and Input Adjustment

Managing Dante subscriptions and adjusting input settings.

Sending Beam Settings from Modeler to CSD

Transferring beam configuration data from Modeler to selected MSA12X arrays in CSD.

Storing and Recalling Beam Presets

Saving and applying beam pattern configurations as presets.

Setting Power On State and Parameter Sets

Configuring power-on states and assigning presets to parameter sets for external control.

Appendix: How to Set Up IP Address

IP Setup with Dante Card and Router

Steps for IP setup with Dante card and router, including static IP configuration.

IP Setup with ESP (No Dante) and Analog Input

IP setup procedures for ESP without Dante card using analog input.

IP Setup Without ESP/EX-1280C (Analog Input)