Bose Panaray MSA12X - Setting Power On State and Parameter Sets

Design Guide - 37
CSD Properties and Operation
Power On State
Power On State is a Beam Preset that is automatically recalled right after the power cycle of the array. By
default, the first stored Beam Preset is assigned to the Power On State. The Power On State is indicated
below the Beam Preset menu.
You can change the Power On State to a dierent Beam Preset.
1. Click ‘Select POS…’ button
2. Select Power On State dialog box appears. Select the Beam Preset that you want to assign to the Power
On State.
3. Click OK. Now the Power On State has been changed.