36 - Design Guide
CSD Properties and Operation
3. Now the current state is stored to the selected Preset. You can see the currently selected preset on the
Beam Preset menu (‘Preset 1: Sunday’ in this case).
4. If you change any parameter (such as Beam pattern, Beam Gain) from here, the Beam Preset menu
becomes blank. This means that the settings have changed, and the current state of the array has not been
stored to a Beam Preset.
Above: Menu becomes blank after changing Beam EQ.
5. Once you store a beam preset(s), you can recall that beam preset from the drop-down list.
To Next Page
Loading...
