16
Installation
pro.Bose.com
2.
Remove both screws from the bracket and separate the two pieces.
3. Hold the wall bracket in the mounting location to mark and drill the holes.
Use four (4) screws per bracket to attach it to the wall.
The loudspeaker can be mounted vertically on a wall (A), angled down from a ceiling (B) or angled out from a wall (C).
AB C
4. Mount the speaker plate on the 502
®
A loudspeaker using four M8 x 16 mm screws.
Rotate speaker plate 180° to
mount as shown in Step 3A.
M8 x 16 mm (4)
2.3 – 2.8 Nm (20 – 25 in-lb)
To Next Page
Loading...
