Bose VIDEOWAVE Setup Guide

9
PHYSICAL SETUP
Tab 6, 14 Tab 8,16Tab 7, 15English Tab 5, 13Tab4, 12Tab 3, 11Tab 2, 10
You need these items from Kit 1:
*Not rated for in-wall use. In-wall cables are available from Bose or
a Bose authorized dealer.
Placing the monitor with attached stand
1. Place the monitor on a stable, flat surface capable
of supporting the weight of the monitor.
2. On the rear panel of the monitor, firmly pull out on
the bottom of the connector cover to remove it.
Monitor cable*Monitor AC power cord
1
1
Anti-tip straps
Monitor
Connector
cover
00.Marley_Setup.book Page 9 Monday, November 8, 2010 11:04 AM

Bose VIDEOWAVE Specifications

General

System Type	Home theater system
Universal Remote	Yes
Built-in Speakers	Yes
Bluetooth	No
3D Capable	No
Smart TV	No
Control Console Inputs	HDMI, Component, Composite
Audio System	5.1