14
PHYSICAL SETUP
EnglishTab 6, 14Tab 8, 16 Tab 7, 15 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab 2, 10
Control console placement
and connections
You need these items from Kit 1:
1. Place the control console on a flat, stable
surface near the monitor.
• Make sure the supplied 3-meter monitor cable
can reach from the console to the monitor.
• Until your system setup is complete and your
external devices are connected, it is helpful to
keep the control console positioned for easy
access to its rear connection panel.
CAUTION: If using the monitor on the stand, DO NOT
place the control console between the legs of the stand
or anywhere directly under the bottom edge of the moni-
tor. This will avoid blocking ventilation and audio system
openings in the product enclosure.
To Next Page
Loading...
