To Next PageTo Next PageWhat to do if no RDS information is displayed on my Bose Wave II?
If no RDS information is displayed on your Bose Radio, check the system set-up menu to ensure that RDS is set to ON. Also, verify that you are tuned into an FM radio station. The radio station itself may not be broadcasting RDS information.
Why is the display window blank on my Bose Radio?
If the display window on your Bose Radio is blank, press any button on the remote to see if the display turns on. The low-power mode may be enabled, causing the display to power down 30 minutes after the system is turned off.
General| Tuner | AM/FM |
|---|---|
| Display | LCD |
| Clock | Yes |
| Alarm | Yes |
| Sleep Timer | Yes |
| Outputs | Headphone jack |
| Remote Control | Yes |
| Audio Output | Stereo |
| Type | Tabletop |
| Inputs | Auxiliary |
| Presets | 6 AM, 6 FM |
| Speaker Type | Built-in |
Guidance on reading and saving the owner's manual for proper system setup and operation.
Guidelines for choosing an optimal placement for the Wave® radio II for best performance.
Instructions on how to connect the Wave® radio II to an electrical outlet.
Step-by-step guide to setting the current time on the Wave® radio II using the remote.
Explanation of how to use the remote control buttons for various functions.
Methods for tuning to radio stations using Seek and Tune buttons.
Steps to set your Wave® radio II to wake you to a radio station.
Instructions for setting the specific wake-up time for the alarm.
Accessing and navigating the system's setup menu for customization.
Common problems and their solutions for the Wave® radio II.
Information on how to contact Bose® Customer Service for assistance.
Instructions on how to request warranty service and return the product.
Contact details for customer support and service in the USA and Canada.
Contact details for customer support and service across various European countries.
Contact details for customer support and service in Asian and Pacific regions.
