53
Measurement display
appears again even with the arm held still,
this may be an indication of an irregular
heartbeat. Please discuss this with your
doctor at your next visit.
Blood pressure is a dynamic parameter and
can be affected by the patient’s position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
➡ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start button again briefly.
Allow at least two minutes be-
tween measurements.
➡ If no further measurement is required,
remove the cuff from the arm.
To Next Page
Loading...
