The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (30 measurements),
the oldest measurement is deleted and
the current one stored.
Note on guest mode:
If a measurement value is not be kept,
press „M“ while the measured values are
still on display.
Invalid measurements with an “Err” mess-
age (see page 58) are not stored.
If the symbol appears after the meas-
urement, it is recommended that the
measurement is repeated, holding the
arm completely still. If the symbol
52
Measurement display
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
Systole
mmHg
Diastole
mmHg
Pulse/min.
Illustration 7
After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
To Next Page
Loading...
