54
Completing the blood pressure record card
Retrieving the average value and WHO classification
➡ Enter each individual value in your
record card.
➡ When the unit is switched off, recall
the average value after 30 recorded
measurements by briefly pressing
„M“.
The average value of all stored results
(systole and diastole) appears. In the
„Pulse“ display the number of the sto-
red measurements flashes.(see illustra-
tion 8).
➡ Enter the average value in the field
specifically reserved for this in your
record card.
If there is no measurement in the memory,
“ ” is displayed for systole and diastole
and “ ”flashes for the number of meas-
urements.
A00
0
To Next Page
Loading...
