Boss DD-500 - Saving a Patch; Steps for saving edited patches, including naming and selecting the destination.

11
Saving a Patch
Here’s how to save a patch that you’ve edited.
1. Press the [EXIT] button and [EDIT] button simultaneously.
2. Use the [TIME/VALUE] knob to select the save-destination
number.
Bank [A] switch [B] switch [TAP/CTL] switch
Bank 01 01A 01B 01C
Bank 02 02A 02B 02C
: : : :
Bank 99 99A 99B 99C
* If you want to use the [TAP/CTL] switch to select patch C, refer to “Assigning the Functions of
the [A], [B], and [TAP/CTL] Switches” (p. 19).
3. Press the [
H
] button to select the patch name.
4. Edit the patch name.
[
H
] [
I
] buttons
Move the cursor
[TIME/VALUE] knob Edit the character
5. Press the [EDIT] button to save the patch.
If you decide to cancel, press the [EXIT] button.
By moving the cursor to “WRITE TO” and turning the [TIME/VALUE] knob, you can initialize a
patch or exchange patches.