Boss GT-1000CORE Parameter Guide

3
Basic Operation
Basic Procedure for Eect Editing
The edit screens show the block conguration (eect chain) of all
eects provided by the GT-1000CORE, as well as the output and
send/return. You can edit from this eect chain display by selecting
the block that you want to edit.
1. Press the [EFFECT] button.
The edit screen (eect chain) appears.
2. Turn knob [6] to select the block that you want to
edit.
The selected block is enclosed by a thick frame.
* By pressing knob [SELECT] you can turn the selected eect on/o.
Eects that are o are shown in gray. When the eect is turned on,
it is shown in white.
O On
3. Use knobs [1]–[5] to adjust the parameters that are
shown below the screen.
Use the PAGE [
K
] [
J
] buttons to switch between the parameters
that you want to edit. The current page is indicated in the lower
center of the screen.
* To change a value in larger steps, turn a knob while pressing it.
* The number of parameters and pages diers depending on the
eect.
Editing while viewing all parameters
From the edit screen, you can long-press knob [SELECT] to see a list
of all parameters of the selected block. You can edit the parameters
from this list.
1. Turn the [SELECT] knob to select the item that you
want to set.
Turning the knob will move the selected item vertically.
2. Turn knobs [1]–[6] to edit the value of the
parameters shown in the screen.
Use the PAGE [K] [J] buttons to switch between lists of parameters.
Eect Placement
By moving blocks such as eects, output, and send/return, you can
freely change the order in which the eects are placed, or arrange
them in parallel.
Changing the placement of eects etc.
1. Press the [EFFECT] button.
The eect chain is shown.
2. Use knob [SELECT] to select the block that you
want to move.
3. While pressing knob [SELECT], turn it left or right.
The selected block moves left or right.

Boss GT-1000CORE Specifications

General

Patches	250 (User) + 250 (Preset)
Outputs	2 x 1/4" (L/MONO, R), 1 x XLR (L), 1 x XLR (R)
MIDI	In/Out
USB	1 x Type B
Features	Bluetooth, Looper, Tuner
Power Source	AC adaptor (included)
Display	LCD
Expression Pedal	No (external pedal required)