Boss GT-1000CORE Parameter Guide

4
Basic Operation
Using STOMPBOX
Your preferred settings for each eect can be saved as a “STOMPBOX.”
You can select these saved settings and use them to create your
sound just as though you were connecting compact pedal eects.
The STOMPBOX data is common to all patches; this means that all
patches using the same STOMPBOX can be edited simultaneously.
1. Press the [EFFECT] button.
2. Use the [SELECT] knob to choose the eect you’re
going to edit.
3. Use the PAGE [
K
] [
J
] buttons to move to the last
page.
4. Press the [5] knob.
The STOMPBOX select window appears.
5. Turn knob [SELECT] to select the STOMPBOX type.
6. Press the [SELECT] knob.
Editing the STOMPBOX
1. Turn knobs [1]–[5] to edit the parameter value that
are shown in the screen.
Use the PAGE [
K
] [
J
] buttons to switch between lists of
parameters.
Reading STOMPBOX Settings into a Patch
1. Press the [EFFECT] button.
2. Use the [SELECT] knob to choose the eect you’re
going to edit.
3. Use the PAGE [
K
] [
J
] buttons to move to the last
page.
4. Press the [5] knob.
The STOMPBOX select window appears.
5. Turn knob [SELECT] to select the STOMPBOX type.
6. Press the [5] (STOMPBOX COPY) knob.
The contents of the STOMPBOX are recalled into the patch.
You can edit the patch without modifying the contents of the
STOMPBOX.
Writing Patch Settings into a STOMPBOX
1. Press the [EFFECT] button.
2. Use the [SELECT] knob to choose the eect you’re
going to save.
3. Use the PAGE [
K
] [
J
] buttons to move to the last
page.
4. Press the [5] knob.
The STOMPBOX select window appears.

Boss GT-1000CORE Specifications

General

Patches	250 (User) + 250 (Preset)
Outputs	2 x 1/4" (L/MONO, R), 1 x XLR (L), 1 x XLR (R)
MIDI	In/Out
USB	1 x Type B
Features	Bluetooth, Looper, Tuner
Power Source	AC adaptor (included)
Display	LCD
Expression Pedal	No (external pedal required)