Boss GT-1000CORE Parameter Guide

5
Basic Operation
5. Press the [4] (WRITE TO STOMPBOX) knob.
6. Turn knob [1] to select the writing-destination
STOMPBOX.
7. Use knobs [3]–[5] and [SELECT] knob to name the
STOMPBOX.
You can turn the [SELECT] knob to move the cursor within the
name.
Reference
For details on naming the STOMPBOX, refer to “Editing a name”
(p. 56).
Basic MENU Operations
Here you can make settings that are common to the entire GT-1000CORE
(system parameters).
1. Press the [MENU] button.
* You can use the PAGE [
K
]
[
J] buttons to see additional items.
2. Press a knob [1]–[5] to select the item that you want
to edit.
A sub-menu appears.
3. Once again press a knob [1]–[5] to select the item
that you want to edit.
4. Use knobs [1]–[5] and [SELECT] knob to select
parameters or edit the values.

Boss GT-1000CORE Specifications

General

Patches	250 (User) + 250 (Preset)
Outputs	2 x 1/4" (L/MONO, R), 1 x XLR (L), 1 x XLR (R)
MIDI	In/Out
USB	1 x Type B
Features	Bluetooth, Looper, Tuner
Power Source	AC adaptor (included)
Display	LCD
Expression Pedal	No (external pedal required)