7
Getting Ready
Operation of the [1]–[3] Knobs
5 When function names or parameters are shown in the lower line of the display, the [1]–[3] knobs
correspond to those functions or parameters.
[1] [2] [3]
5 In the CTL, ASSIGN & MIDI SETTING screen (p. 12), the WRITE UTILITY screen (p. 13), and the MENU
screen (p. 15), you can operate any knob to move the cursor and select an icon.
[1] [2] [3]
5 In screens where knob or switch icons are shown, the [1]–[3] knobs correspond to those icons.
[1] [2] [3]
Switching Pages
5 When page tabs are displayed on the screen, you can switch pages by pressing the [< PAGE] [PAGE >]
buttons.
To Next Page
Loading...
