Boss MS-3 User Manual

12
Editing the Settings of a Patch
MEMO
Pressing the [ON/OFF] button in the edit
screen switches the eect’s on/o status. This
lets you hear what the eect is doing.
When tabs are displayed on the screen, you
can switch pages by pressing the [< PAGE]
[PAGE >] buttons.
5. Use the [1]–[3] knobs to edit the value
of the parameters shown in the screen.
6. Press the [EXIT] button a number of
times to return to the play screen.
Changing the Eect Connection Order
1. In the eect chain screen, use the [1]
knob to select the eect that you want
to move.
NOTE
5 You can’t move L1–3. However, FX1, FX2,
MOD1, MOD2, DLY, REV, NS, and FV can be
freely moved before or after L1–3.
5 MST, PATCH LVL, OUTPUT, and CTL cannot be
moved.
2. Use the [2] knob to move the selected
eect.
Changing the CTL/ASSIGN/MIDI Settings
For each patch, you can make CTL, ASSIGN, and
MIDI settings to operate a variety of parameters.
1. In the eect chain screen, choose “CTL”
with the [1] knob, and press the [ENTER]
button.
The CTL, ASSIGN & MIDI SETTING screen
appears.
2. Use the [1]–[3] knobs to choose the
controller that you want to edit.
Controllers that are turned on are indicated
with icons. When controllers are turned o,
“OFF” is indicated.
Icon Explanation
–
Specify the parameters that are
controlled by number switches [1]–
[4] in manual mode.
* This works only in manual mode.
Use the [MEMORY/MANUAL] switch
to specify the parameter that you
want to control.
Specify the parameter that is
controlled when you operate the
number switch of the currently
selected patch in memory mode.
(Example)
01-1 0 number switch [1]
* This works only in memory mode.
Specify the parameters that are
controlled by expression pedals
(EXP 1, 2) connected to the CTL IN
jacks.

Boss MS-3 Specifications

General

Bit rate	24 bit
Product color	Black
Sound effects	Delay, Looper
Sound effects quantity	112
AC adapter included	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) output	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	97 mm
Width	275 mm
Height	68 mm
Weight	1100 g