To Next PageTo Next Page
Need help?Do you have a question about the Boss MS-3 and is the answer not in the manual?
General| Bit rate | 24 bit |
|---|---|
| Product color | Black |
| Sound effects | Delay, Looper |
| Sound effects quantity | 112 |
| AC adapter included | Yes |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wired |
| 6.35 mm (1⁄4-inch) output | 1 |
| Display type | LCD |
| Power source type | DC |
Weight and Dimensions| Depth | 97 mm |
|---|---|
| Width | 275 mm |
| Height | 68 mm |
| Weight | 1100 g |
Integrated system with built-in effects and three loops for favorite pedals, enabling a compact and sophisticated pedalboard.
Details the connection of effect loops (L1-3 SEND/RETURN), input guitar/bass, and output to amps/mixers.
Explains the functions and connections for the CTL OUT, MIDI OUT, and CTL IN jacks for external control.
Identifies and explains the functions of the MS-3's top panel buttons, knobs, and indicators.
Illustrates the layout and navigation between different operational screens like System Settings and Play.
Details how to use the [1]-[3] knobs for parameter adjustment and navigate between screens using [< PAGE] and [PAGE >] buttons.
Covers the correct procedure for powering the unit on/off and using the built-in guitar tuner.
Explains patch organization, banks, and switching between Memory and Manual modes for operation.
Details how to switch banks and patches, and understand the information displayed on the Play screen.
Outlines the fundamental process of recalling, editing effects, and adjusting parameters for a patch.
Covers modifying the effect chain order and configuring CTL, ASSIGN, and MIDI settings for patch control.
Guides users through saving edited patches, editing patch names, and using the WRITE UTILITY.
Details procedures for exchanging patches with other locations and resetting patches to default values.
Explains how to enter the MENU for system settings and adjust display contrast and brightness.
Covers enabling/disabling the auto-off function and performing a factory reset to restore default settings.
Guides on installing the USB driver and dedicated software for computer-based patch management.
Lists common error messages with their solutions and provides a block diagram of the unit's signal flow.
Provides a comprehensive list of the BOSS MS-3's main technical specifications.
Covers critical safety warnings, general precautions, and important operational notes for safe usage.
