Boss Phase Shifter PH-3 - Specifications

23
Specifications
PH-3: Phase Shifter
Nominal Input Level ..................-20 dBu
Input Impedance.........................1 M Ω
Nominal Output Level ...............-20 dBu
Output Impedance......................1 k Ω
Recommended Load Impedance
....10 k Ω or greater
Residual Noise.............................-92 dBu (IHF-A, Type.)
Controls ........................................Pedal Switch, RATE Knob, DEPTH Knob,
RES (resonance) Knob, STAGE Switch
Indicators......................................CHECK Indicator
(Serves also as tempo and battery check indicator)
Connectors
....................................INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC adaptor Jack
Power Supply ..............................DC 9 V; Dry battery (9 V type) S-006P/9 V (6F22/9 V)
Dry battery (9 V type) 6AM6/9 V (alkaline)
AC Adaptor (PSA-series: optional)
Current Draw...............................50 mA (DC 9 V)
* Expected battery life under continuous use:
Carbon: 2 hours Alkaline: 6 hours
These figures will vary depending on the actual conditions of use.