7
Day/Time Setting
• To set the day, press D repeatedly to step through. Press and hold the key 2 seconds, the Day of
the Week will change continuously.
• To set the hour, press H repeatedly to step through. Press and hold the key, the numbers will
change continuously.
• To set the minute, press M repeatedly to step through. Press and hold the key 2 seconds, the
numbers will change continuously.
View/Change temperature setting mode
• In the home screen in Auto/Comfort/Economy/Off mode, press or o enter View/Change
temperature settings.
• The LCD will show the current temperature setting with flashing numbers and the SET icon is
displayed.
• Press or again to increase or decrease the set temperature in 0.5°C steps.
• Press and Hold or for 2 seconds to enter fast advance in 1.0°C steps.
• In Auto/Comfort/Economy mode, the temperature can be set from 5°C to 30°C. In OFF mode,
the temperature is set at 5°C and cannot be changed.
• During changing the set temperature, only , and Set have functionality.
• If the Set key is pressed or no further keys have been pressed after 5 seconds, the setting is
saved and it will return to the home screen automatically.
Change Operation Mode
The thermostat can operate in four different modes: AUTO, COMF, ECON or OFF. The default
mode is AUTO.
1) COMF mode
• Press anytime in other modes to enter COMF mode. The screen displays and the
setting flashes for 5 seconds. When the temperature flashes, the setting can be changed
(default 21°C) by using ᴧ or ᴧ in increments of 0.5°C. Press and hold the buttons, the setting
will change continuously in increments of 1.0°C.
• Wait 5 seconds to confirm the temperature. Next time the thermostat is in COMF Mode, this
setting will be remembered.
• Anytime during the COMF mode press , it will go back to the AUTO (automatic) mode.
Symbol on the LCD will be off, icon will be displayed.
2) ECON mode
• Press anytime to change into ECON mode. will be displayed on the LCD. Change the
setting (default 16°C) the same as in COMF mode. Anytime during the ECON mode, press to
return to AUTO (automatic) mode
3) AUTO mode
• Automatic mode sets the thermostat to follow the temperature program. is displayed on
LCD. Change the setting the same as in COMF mode.
4) OFF mode
• Off mode sets the thermostat to maintain a minimum temperature of 5°C (default) that acts as a
frost protection measure. This value cannot be changed.
• In AUTO/COMF/ECON mode, pressing ON/OFF will change to OFF mode.
• In OFF mode, press ON/OFF again to revert to the previous mode.
• In OFF mode, press to change into COMF mode. Press again to change to Auto mode.
• In OFF mode, press to change into ECON mode. Press again to change to Auto mode.
To Next Page
Loading...