BossWeld M150 - Torch Spares and Drive Roller Information; BZ15 MIG Torch Spare Parts List; Machine Drive Roller Size and Type Guide

BZ15 BOSSWELD BINZEL STYLE MIG TORCH SPARES
23
PART NO. DESCRIPTION
92.05.15 Tip holder with spring l/hand
PART NO. DESCRIPTION
92.01.15.06 Contact tip 0.6mm x M6 x 6mm dia x
25mm long
92.01.15.08 Contact tip 0.8mm x M6 x 6mm dia x
25mm long
92.01.15.09 Contact tip 0.9mm x M6 x 6mm dia x
25mm long
92.01.15.10 Contact tip 1.0mm x M6 x 6mm dia x
25mm long
92.01.25.06 Contact tip heavy duty 0.6mm x M6 x
8mm dia x 25mm long
92.01.25.08 Contact tip heavy duty 0.8mm x M6 x
8mm dia x 25mm long
92.01.25.09 Contact tip heavy duty 0.9mm x M6 x
8mm dia x 25mm long
92.01.25.10 Contact tip heavy duty 1.0mm x M6 x
8mm dia x 25mm long
92.01.M6A09 Contact tip 0.9mm x M6 Al x 8mm dia x
28mm long
92.01.M6A10 Contact tip 1.0mm x M6 Al x 8mm dia x
28mm long
PART NO. DESCRIPTION
92.02.15.CO Adjustable conical nozzle ø 12mm
92.02.15.CL Adjustable cylindrical nozzle ø 19mm
92.02.15.10 Adjustable tapered nozzle ø 10mm
M6 Standard Duty
M6 Heavy Duty M6 Aluminium
CLCO 10
GAS HOLDER
GAS NOZZLE
CONTACT TIP
MACHINE DRIVE ROLLER SIZE (NOTE: MACHINE WILL RUN UP TO 1.0MM WIRE)
30mm
19mm
BZ15 BOSSWELD BINZEL STYLE DIRECT CONNECT MIG TORCH
Please note:
This replacement torch must be replaced by Bossweld or an authorised service centre
Failure to do so will void your machine warranty.
PART NO. DESCRIPTION
92.ER.M150DC Bossweld MIG Torch BZ15 x 2.5mt Direct-Con
* Denotes driver rollers supplies with machine
PART NO. DESCRIPTION
Knurled Drive Roller For Gasless Wire
RK301019.06.08 Drive Roller 0.6/0.8mm Knurled 30 x 10 x 19mm
RK301019.08.09
*
Drive Roller 0.8/0.9mm Knurled 30 x 10 x 19mm
RK301019.08.10 Drive Roller 0.8/1.0mm Knurled 30 x 10 x 19mm
U Grooved Drive Roller For Aluminium Wire
RU301019.08.10 Drive Roller 0.8/1.0mm U Groove 30 x 10 x 19mm
V Grooved Drive Roller For Solid Wire
RV301019.06.08 Drive Roller 0.6/0.8mm V Groove 30 x 10 x 19mm
RV301019.08.09
*
Drive Roller 0.8/0.9mm V Groove 30 x 10 x 19mm
RV301019.08.10 Drive Roller 0.8/1.0mm V Groove 30 x 10 x 19mm
RV301019.09.10 Drive Roller 0.9/1.0mm V Groove 30 x 10 x 19mm
10mm
• Gasless Drive roller has a jagged groove