To Next PageTo Next Page
Need help?Do you have a question about the Bostitch BTF83WW and is the answer not in the manual?
General| Operating Pressure | 70-120 PSI |
|---|---|
| Weight | 5.3 lbs |
| Dimensions | 12.8" x 3.5" x 11.8" |
| Fastener Length | 5/8" - 2-1/8" |
| Magazine Angle | Straight |
| Power Source | Pneumatic |
| Fastener Type | Brad |
| Fastener Size | 18 GA |
Specifies ANSI Z87.1 compliance for eye protection against flying particles.
Details safe practices for air supply, including avoiding certain gases and pressure limits.
Provides safety guidelines for loading fasteners, including hand placement and trigger use.
Outlines safe handling practices, trigger use, and keeping others at a distance.
General instructions for maintaining the pneumatic tool with safety precautions.
Describes the two available operating modes: Sequential Trip and Contact Trip.
Details safe practices for air supply, including fittings and hose requirements.
Reinforces safety measures and provides steps for loading nails into the magazine.
Explains the feature for controlling nail drive depth (flush, countersink).
Highlights risks of accidental firing, trigger holding, and recoil in Contact Trip mode.
Lists common symptoms like leaks, sluggishness, and their causes and fixes.
