Bostitch RN45B User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
RN45B
COIL-FED PNEUMATIC ROOFING NAILER
CLAVADORA NEUMÁTICA ALIMENTADA POR ROLLO PARA TECHADO
CLOUEUR PNEUMATIQUE À ENROULEMENT POUR TOITURE
103280REVG 11/05
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.

Bostitch RN45B Specifications

General

Type	Roofing Nailer
Operating Pressure	70-120 PSI
Magazine Capacity	120 nails
Depth Adjustment	Yes
Power Source	Pneumatic
Fastener Type	Coil Nails
Fastener Length	3/4" - 1-3/4"
Nail Gauge	12
Height	11"

Summary

OPERATION and MAINTENANCE MANUAL

Limited Warranty

Details the warranty terms for Bostitch products in the US and Canada.

SAFETY INSTRUCTIONS

General Safety Warnings

Essential safety precautions for operating the pneumatic tool.

AIR SUPPLY AND CONNECTIONS

OPERATION

MAINTAINING THE TOOL

RN45B TOOL SPECIFICATIONS

Fastener Specifications

Tool Air Fitting

Operating Pressure

Recommended air pressure range for optimal and safe tool operation.

TOOL OPERATION MODES

AIR SUPPLY DETAILS

Fittings and Hoses

Regulator and Pressure

Guidelines for air pressure regulation and operating pressure.

Filter and Lubrication

TOOL OPERATION

Trigger Operation

Contact Trip Operation

Details the contact trip mechanism for driving fasteners.

Sequential Trip Operation

Explains the sequential trip mechanism for controlled fastening.

MAINTENANCE DETAILS

Air Supply-Pressure and Volume

TROUBLE SHOOTING