Bostitch N89C User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
N89C
COIL-FED PNEUMATIC FRAMING NAILER
CLAVADORA NEUMÁTICA ALIMENTADA POR ROLLO
CLOUEUR PNEUMATIQUE À ENROULEMENT
166796REVE 3/09
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.

Bostitch N89C Specifications

General

Type	Coil Nailer
Magazine Capacity	300 nails
Operating Pressure	70-120 PSI
Power Source	Pneumatic
Fastener Type	Coil nails
Nail Diameter	0.131 inch (11 gauge)

Summary

SAFETY INSTRUCTIONS

EYE PROTECTION

Details required eye protection conforming to ANSI specifications.

OPERATION

N89C TOOL SPECIFICATIONS

FASTENER SPECIFICATIONS

Details the types and sizes of collated coil nails the N89C supports.

OPERATION MODES

SEQUENTIAL TRIP (Gray trigger)

Describes the sequential operation requiring trip and trigger activation.

CONTACT TRIP (Black trigger)

Explains the contact operation allowing rapid fastening with trigger held.

AIR SUPPLY AND CONNECTIONS

OPERATING PRESSURE

LUBRICATION

LOADING THE N89C

NAIL PLATFORM ADJUSTMENT

LOADING PROCEDURE

FASTENER DEPTH CONTROL ADJUSTMENT

ADJUSTING DEPTH CONTROL

Instructions on how to adjust the nail depth control mechanism.

TOOL OPERATION

BEFORE HANDLING OR OPERATING

SEQUENTIAL TRIP OPERATION

Detailed explanation of how to use the sequential trip mode.

SINGLE FASTENER PLACEMENT

RAPID FIRE OPERATION

TOOL OPERATION CHECK

SEQUENTIAL TRIP OPERATION CHECK

Steps to verify the correct functioning of sequential trip mode.

CONTACT TRIP OPERATION CHECK

Steps to verify the correct functioning of contact trip mode.

MAINTAINING THE PNEUMATIC TOOL

AIR SUPPLY-PRESSURE AND VOLUME

TROUBLESHOOTING

COIL NAILERS

Specific troubleshooting tips for coil nailers.

SKIPPING FASTENERS

FASTENERS JAM IN TOOL/CANISTER