Bostitch N88RH User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDER-
STAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUC-
TIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT
YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE SEGURI-
DAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HERRAMIENTA
PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU REPRESEN-
TANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSE-
MENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS AVEZ DES
QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE
BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
N88WW/N88RH
PNEUMATIC STICK NAILER
CLAVADORA NEUMÁTICA ALIMENTADA POR BARRA
CLOUEUR PNEUMATIQUE À CARTOUCHE
115422REVB 1/01
Stanley Fastening Systems

Bostitch N88RH Specifications

General

Brand	Bostitch
Model	N88RH
Category	Nail Gun
Language	English

Summary

Limited Warranty

Safety Instructions

Eye Protection Requirements

Mandatory eye protection conforming to ANSI standards for all operators and bystanders.

Hearing and Head Protection

Additional safety gear like hearing and head protection may be required based on environment.

Air Supply and Connections

Power Source and Fittings

Use clean, regulated air; avoid gases; ensure proper fittings and pressure release.

Tool Specifications

Model and Actuation Types

Details on N88WW/N88RH models, contact trip vs. sequential trip actuation.

Fastener Compatibility

Specifications for 28° wire collated and 21° plastic collated stick nails.

Air Fitting and Operating Pressure

1/4" NPT male plug required; operating pressure 70-120 PSIG.

Air Consumption Rate

Tool requires 7.5 CFM at 80 PSI for 100 nails/minute; adjust for usage.

Air Supply and Connections Details

Hoses and Filters

Use rated hoses; filter air supply for optimal performance and tool longevity.

Lubrication

Loading the N88

N88WW Loading Procedure

Steps for loading nails into the N88WW model, including pusher spring action.

N88RH Loading Procedure

Steps for loading nails into the N88RH model, including magazine latch and pusher release.

Fastener Depth Control and Exhaust

Depth Control Adjustment

Adjust nail drive depth using the contact arm and locking button.

Directional Exhaust Deflector

Adjustable exhaust deflector can be rotated by hand to any desired position.

Removing Nails

Procedure for removing nails from the N88WW and N88RH magazines.

Tool Operation

Contact Trip Operation Methods

How to use single fastener placement and rapid fastener operation with contact trip.

Sequential Trip Operation Method

Procedure for sequential trip to drive fasteners accurately with trigger and contact trip.

Tool Operation Checks

Contact Trip Operation Checks

Tests to verify correct function of the contact trip mechanism.

Sequential Trip Operation Checks

Tests to verify correct function of the sequential trip mechanism.

Maintaining the Pneumatic Tool

Pusher Spring Handling Caution

Warnings and precautions when working with the pusher spring assembly.

Assembly and Lubrication Procedures

Procedure for assembling seals and lubricating parts with specific lubricants.

Air Supply Volume Importance

Impact of adequate air volume, pressure, and checking for restrictions.

Trouble Shooting Guide

Driver Maintenance Instructions

Worn Driver Symptoms and Effects

Signs of a worn driver affecting nail drive quality and power.

Driver Length Adjustment and Limits

Information on adjusting driver length for wear compensation and limits.