Bostitch N100C User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL, TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR ESTE
MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE SEGURIDAD Y LAS
INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HERRAMIENTA PARA FUTURA
REFERENCIA. SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU REPRESENTANTE DE BOSTITCH
O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÊTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSEMENTS.
GARDER CE MANUEL AVEC L’OUTIL POUR FUTURE RÉFÉRENCE. SI VOUS AVEZ DES QUESTIONS,
CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS et D’ENTRETIEN
N100C/N100CPP/N130C
COIL-FED PNEUMATIC NAILERS
CLAVADORAS NEUMÁTICAS ALIMENTADAS POR ROLLO
CLOUEURS PNEUMATIQUES À ENROULEMENT
102777REVL 8/05
STANLEY FASTENING SYSTEMS L.P.

Bostitch N100C Specifications

General

Model	N100C
Power Source	Pneumatic
Operating Pressure	70 - 120 PSI
Magazine Capacity	300 nails
Nail Type	Coil
Nail Length	2 inches to 4 inches

Summary

INTRODUCTION

LIMITED WARRANTY

SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

Essential safety measures covering eye protection, air supply, loading, operation, and maintenance.

AIR SUPPLY SAFETY

Specific safety guidelines for connecting and using the air supply.

TOOL SPECIFICATIONS

MODEL AND SPECIFICATIONS DETAILS

Comprehensive details on model identification, air fittings, pressure, and consumption.

AIR SUPPLY AND CONNECTIONS

AIR SUPPLY COMPONENTS

Information on fittings, hoses, regulators, and filters for air supply.

LUBRICATION AND COLD WEATHER

Guidelines for lubrication and operation in cold weather conditions.

LOADING THE COIL NAILER

LOADING PROCEDURE AND ADJUSTMENTS

Steps for opening, adjusting, loading nails, and closing the magazine.

TOOL OPERATION

PRE-OPERATION CHECKS AND MODES

Readiness checks and detailed explanations of contact and sequential trip operations.

TOOL OPERATION CHECK

OPERATION VERIFICATION PROCEDURES

Step-by-step checks for contact and sequential trip mechanisms.

ADDITIONAL SAFE OPERATION RULES

Crucial safety rules to observe during tool operation.

MAINTAINING THE PNEUMATIC TOOL

MAINTENANCE AND SPECIFICATIONS

Details on replacement parts, seal assembly, air supply, and fastener specs.

TROUBLE SHOOTING

PROBLEM RESOLUTION GUIDES

Common problems, causes, corrections, and coil nailer specific issues.

DRIVER MAINTENANCE INSTRUCTIONS

DRIVER AND EXHAUST MANAGEMENT

Instructions for driver wear, length settings, and exhaust deflector adjustment.

AVAILABLE ACCESSORIES

List of optional accessories for the Bostitch nailer.