Bostitch N88RH-2MCN User Manual

N88RH-2MCN
PNEUMATIC STICK NAILER
CLAVADORA NEUMÁTICA ALIMENTADA POR BARRA
CLOUEUR PNEUMATIQUE À CARTOUCHE
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
158771REVC 11/05
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.

Bostitch N88RH-2MCN Specifications

General

Brand	Bostitch
Model	N88RH-2MCN
Category	Nail Gun
Language	English

Summary

Safety Instructions

General Safety Warnings

Emphasizes wearing eye protection and other safety gear for user and bystanders.

Air Supply Warnings

Describes specific warnings related to air supply and potential hazards.

Air Supply and Connections

Loading the Tool

Loading Procedure

Loading Safety Precautions

Operating Your N88RH-2MCN

Sequential Trip Operation

Explains the sequential trip mechanism and its safety advantages.

Metal Connector Safety

Specific safety precautions for using metal connectors with the tool.

Tool Operation Details

Sequential Trip Operation Explanation

Operation Checks and Practices

Sequential Trip Operation Check

Procedures to verify the correct functioning of the sequential trip mechanism.

Safe Operation Practices

Maintaining the Pneumatic Tool

Trouble Shooting

Problem Identification and Causes

Lists common tool problems, their causes, and troubleshooting steps.

Corrective Actions

Provides recommended solutions and corrective actions for identified tool problems.