Bostitch N88WWB User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND
AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE
TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR BOSTITCH
REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR ESTE
MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE SEGURIDAD Y LAS
INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HERRAMIENTA PARA FUTURA
REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU REPRESENTANTE DE BOSTITCH O
CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSEMENTS.
GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS AVEZ DES QUESTIONS,
CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
N88WWB/N88RH
PNEUMATIC STICK NAILERS
CLAVADORA NEUMÁTICA ALIMENTADA POR BARRA
CLOUEUR PNEUMATIQUE EN BANDES
159720REVC 11/05
Stanley Fastening Systems L.P.

Bostitch N88WWB Specifications

General

Brand	Bostitch
Model	N88WWB
Category	Nail Gun
Language	English

Summary

Operation and Maintenance Manual

Introduction

Limited Warranty

Safety Instructions

Eye Protection Requirements

Mandates ANSI-compliant eye protection against flying particles.

Additional Safety Protection

Addresses hearing and head protection requirements in specific environments.

Air Supply and Connections

Power Source Warnings

Prohibits oxygen, combustible gases, or bottled gases as power sources.

Tool Specifications

Model and Fastener Specifications

Lists dimensions, weights, and compatible fastener types for N88WWB/N88RH.

Air Fitting and Operating Pressure

Specifies air fitting size and recommended operating pressure range.

Air Consumption

Details the air volume required for tool operation based on usage rate.

Operation

Contact Trip Operation

Explains how to use the contact trip mechanism for fastener driving.

Sequential Trip Operation

Details the procedure for sequential trip operation for accurate fastener placement.

Lubrication

Cold Weather Operation

Loading the N88

To Prevent Accidental Injuries

Safety precautions to avoid accidental firing during loading.

Fastener Depth Control Adjustment

Directional Exhaust Deflector

Removing Nails

Tool Operation

Contact Trip Operation Details

Details single fastener placement and rapid fastener operation methods.

Sequential Trip Operation Details

Explains how to operate the tool using the sequential trip mechanism.

Tool Operation Check

Safe Operation Guidelines

Maintaining the Pneumatic Tool

Replacement Parts

Recommendation to use genuine Bostitch replacement parts for optimal performance.

Assembly Procedure for Seals

Steps for lubricating and assembling internal seals during repair.

Air Supply-Pressure and Volume

Explains the importance of adequate air volume and pressure for tool function.

Trouble Shooting