Bowa ARC 250 - Page 74

11 Technical specifications
74 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
Setting
Program
Forced COAG Non Cutting
0-1, 3-4, 8-99
Values measured on ohmic resistances
 Output power P [W] versus load
resistance R [Ω] with "Forced COAG
Non Cutting" settings 120 W and 60 W
 Output power P [W] versus "Forced
COAG Non Cutting" setting.
Rated load resistance = 500 
 HF output voltage U [Vp] versus
"Forced COAG Non Cutting" setting (no
load)