Bowa ARC 250 - Page 75

11 Technical specifications
900-301_IFU-V2.2_11316-S0-20131023-EN Operating Manual ARC 250 / 303 75
Setting
Program
Forced COAG Cutting
0-1, 3-4, 8-99
Values measured on ohmic resistances
 Output power P [W] versus load
resistance R [Ω] with "Forced COAG
Cutting" settings 75 W and 38 W
 Output power P [W] versus "Forced
COAG Cutting" setting.
Rated load resistance = 500 
 HF output voltage U [Vp] versus
"Forced COAG Cutting" setting (no
load)