BÖWE P 240 - Page 3

Necessary operation items and chemical additives
Dear customer,
At the time your dry-cleaning machine P 240 (P 300 USA)
P 300 (P 350 USA) will be installed please make sure that the following
items are available:
- Solvent
It is only allowed to use TETRACHLOROETHANE (perc) stabilised, high
purity, according to DIN 53978.
Total filling amount for the first filling: P 240 (P 300 USA): 220 l (360 kg)
P 240 (P 300 USA): 58.1 USgal (794 lb)
P 300 (P 350 USA): 260 l (420 kg)
P 300 (P 350 USA): 68.7 USgal (926 lb)
Tank I: min. filling volume: P 240 (P 300 USA): 60 l (15.9 USgal)
P 300 (P 350 USA): 70 l (18.5 USgal)
- Chemical additives
Chemical additives with thermal stability under operation conditions must be
used.
Depending on the equipment the following should be available:
- cleaning aids
- antistatic agent
- waterproofing
- pre- and post spotting
BÖWE Textile Cleaning GmbH
Rumplerstraße 2, D-86159 Augsburg
Telefon (08 21) 57 07-0, Telefax (08 21) 57 07-351
Phone: ++49-821-5707-0, Fax: ++49-821-5707-351
email: vertrieb@boewe-tc.de