68
P21/P26/P30
11. Maintenance 11.
Sequence of the maintenance work on the button trap:
Remove strainer insert
Clean strainer insert
Clean additional round sieve
Reinsert sieve cartridge
Attention:
Never work without a strainer insert - the pump could
be damaged by foreign bodies!
Attention:
Perform maintenance only when the machine has
been turned off and after the drying has finished.
Insert the lint filter basket and make sure that it sits firmly in place
Clean the cover seal
Firmly close the cover of the common maintenance opening
11.5.2 Lint Post-Filter
Check the post-filter daily:
Open the cover on the airshaft
Remove the post-filter, suction it off, or, alternatively, clean it with a brush (wash if needed).
Replace the post-filter.
Close the cover
To Next Page
Loading...