Bowflex 5.1S - Final Inspection Before Use; Pre-Use Inspection and Warnings

5
Step 5. Final Inspection
Inspect your equipment to ensure that all fasteners are tight and components are properly assembled.
Do not use or put the equipment into service until the equipment has been fully assembled and inspected for correct performance in
accordance with the User’s Guide. Review all warnings afxed to the equipment.
8
7
8
6
I
X1
*
*
*
*
*
*
*
*
*
*
*
*
*
*
X1
I
Step 4.
( * ) Hardware is pre-installed and not on the Hardware Card.