Bowflex Max Trainer M3 - Meal Planning and Nutrition; Meal Plan Overview; Breakfast, Snacks, and Meals

43
NOTICE: ThisdocumentprovidesinstructionsforthereplacementoftheConsoleAssemblyontheBowexMaxTrainer
®
M3 / M5.
If you need assistance, please call Bowflex Customer Service at 1-800-605-3369.
M5
only
Note: TheBowexMaxTrainer
®
M3 is used in the following images. The
procedure is the same for the M5 model.
1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
each side) from the Console Assembly.
3. Carefully lift the Console Assembly and expose the Cable Connections.
Note: do not crimp any of the Console Cables.
4. Carefully disconnect the Cables noting their locations (see arrows).
Note: do not crimp any of the Console Cables.
5. Using a #2 Phillips screwdriver, remove the indicated screw (see oval)
from the rear of the Console Display.
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power
cord in a secure location.
Console Assembly