Bowflex Max Trainer SE - Noise Diagnosis and Resolution

16
Condition/Problem Things to Check Solution
Squeak noise Roller wheels Clean the rails and surface of the rollers with a damp cloth. Apply
silicone lubricant to a dry cloth and wipe the rails to eliminate
roller noise.
Clunk or thump sound per
pedal rotation/foot pedals
loose/unit diicult to
operate
Hardware Tightly secure all hardware on the Pedals, Legs and Handlebar Arms
(see below).
Handlebar Assembly
Stabilizer
Pedals
Dynamic Handlebars
NOTICE: Before Troubleshooting any noises, be sure
the indicated hardware has been fully tightened. After
the first few workouts, some hardware will need to be
tightened again. To ensure quiet and smooth operation,
make sure to tighten the indicated hardware after three
workouts.
Be sure to inspect and fully tighten all hardware monthly
or after every 20 hours of use.
Troubleshooting