Bowflex Power Pro - Power Pro Assembly Instructions; Bowflex Power Pro Parts Reference Guide

Power Pro Assembly Instructions
Before you begin, you will need a 9/16" wrench, a 7/16" wrench, a 1/2" open end wrench, a crescent
wrench (to hold the bolt while tightening with other), a rubber mallet (for step #5) and a phillips head
(+) screw driver. Please follow these assembly instructions carefully. If you experience any difficulty,
please call a Bowflex customer service representative and ask for assistance. 1-800-269-3539.
Bowflex Power Pro Parts Reference Guide
4
Name: 5/16" Flat Washer
Part #: 80106
Quantity: 2
Name: 3/8" Nylon Lock Nut
Part #: 90196
Quantity: 10
Name: 1/4" Nylon Lock Nut
Part #: 90204
Quantity: 2
Name: 1/4" x 2"
Hex Head Bolt
Part #: 90147
Quantity: 2
Name: 3/8" x 2 1/2"
Hex Head Bolt
Part #: 90193
Quantity: 1
Name: #12 x 3/4”
Self Tapping Screw
(the medium-sized screw)
Part #: 90194
Quantity: 4
Name: #14 x 3/4”
Wood Screw
(largest-sized screw)
Part #: 90151
Quantity: 2
Name: 3/8" x 4"
Hex Head Bolt
Part #: 90137
Quantity: 1
Name: 3/8" x 3/4"
Square Head Bolt
Part #: 80165
Quantity: 10
Name: Bolt Keeper, Pivot Bracket
Part #: 95303
Quantity: 2
Name: 5/16" x 7/8" Tap Bolt
Part #: 90206
Quantity: 2
Name: Bolt Keeper, Rear Leg
Part #: 95306
Quantity: 2
Name: Pivot Bracket
Part #: 95302
Quantity: 1
Name: 1/4" Washer
Part #: 90156
Quantity: 1
Name: 3/8" Flat Washer
Part #: 90138
Quantity: 8
Name: #10 x 3/4”
Sheet Metal Screw
(smallest screw)
Part #: 90208
Quantity: 4