Place Nonskid Pads here (facing top)
Step 8:
Place Bench onto the Bowflex.
Unwrap Cables and Pulleys. Locate Nonskid
Pads. Remove paper backing to expose the
adhesive surface. Adhere Nonskid Pads to
Pulley Frame as shown.
Note:
If you installed a CHEST BAR Attachment,
please go to page 16, step 8.
Hook Hand-Grips into
place by inserting
D-Ring into Snap Hook
on end of cables.
D-Ring
10
Cable
Components for this
assembly are in Box 2
To Next Page
Loading...
