Maintenance
Equipment must be examined for damage and repairs before each use. The owner is responsible to perform routine testing of the locking mechanisms. Worn or
damaged components must be replaced immediately or the equipment removed from service until the repair is made. Only manufacturer supplied components can
be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement
labels. If purchased outside US/Canada, contact your local distributor for them.
Daily/Before Each Use: Examine equipment. Make sure it looks in good condition and operates smoothly. If you nd damage, DO NOT USE. Contact your local distributor, or
Customer Service if purchased within the United States or Canada, for repair information.
Daily/After Each Use: Clean equipment with a clean, dry cloth. Do not use cleansers containing enzymes.
Weekly: Clean equipment fully with a clean cloth and ammonia-based cleaner. Touch up any scratches with touch-up paint to prevent rust, if necessary.
Monthly: Examine the frame for signs of cracking or permanent bending. Do not use the equipment if you see this. If purchased in US/Canada, contact Customer Service for repair
information. If purchased outside US/Canada, contact your local distributor.
If you have any questions on the correct use or maintenance of this equipment, contact Customer Service if purchased within the United States or Canada, or your local distributor if
purchased outside US/Canada. Only Nautilus-trained or Nautilus-authorized personnel should make extensions, readjustments, modifications, or repairs.
Assembly / Owner’s Manual
10
To Next Page
Loading...
