41
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
!
To reduce the risk of electrical shock or unsu-
pervised usage of the equipment, always unplug
the power cord from the wall outlet and wait 5
minutes before cleaning, maintaining or repair-
ing this machine. Place the power cord in a
secure location.
2. Remove the Right Base Shroud from the machine.
3. Disconnect the Middle and Lower Input/Output (I/O) Cables.
Note: Your machine may not match the images provided exactly.
Right Base Shroud
To Next Page
Loading...
