Owner’s Manual
12
Inspect your machine for any worn or loose components prior to use. Tighten or replace any worn or loose
components prior to use. Pay close attention to cables, straps, or harness and their connections.
Review all warning notices.
The safety and integrity designed into a machine can only be maintained when the equipment is regularly
examined for damage and repaired. It is the sole responsibility of the owner to ensure that regular
maintenance is performed. The owner is responsible to make sure that regular maintenance is done.
Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied
components should be used to maintain/repair the equipment.
Clean the bench with a non-abrasive household cleaner after each use. This will keep it looking new. Do not use
automotive cleaner, which can make the bench too “slick.”
Maintenance
To Next Page
Loading...
