www.boyue.com
Copyright 2019 © Shenzhen Boyue Technology Co. Ltd. All rights reserved.
Download the card package, copy the compressed package named update.zip to
the root directory of the device, and enter the setup system update menu. Click Local
Detection Update, and click Install Now in the pop-up menu. The device will
automatically restart and complete the update.
In the upgrade prompt box that pops up, click Download. After the download is
complete, the device will automatically restart and complete the update.
Note: Please do not do any operation during the upgrade process, otherwise it may
cause the booting failure.
1.5. WIFI transmission can not be used
WIFI transfer of books is realized through the local area network, and the reader end
and the transfer end (mobile phone or computer) must be under the same network to
realize the transfer. If the uploader enters the URL of the WIFI uploader APP interface,
the webpage cannot be opened. Please check whether the IP of the reader and the IP of
the transmission terminal are in the same network segment (the judgment basis for the
same network segment: the first three bytes of the IP address are consistent). If you
cannot select a book after opening the webpage on the uploader, please change your
browser and try.
1.6. switch the font of the reading interface
Put the font files (support ttf and otf formats) into the fonts folder of the root
directory (if there is no such folder, create a new one manually), enter the reading
To Next Page
Loading...