Bpt IT/200 - Door Lock Release Triggering Time; Flash Detection Mode

PROGRAMMING
32
ENGLISH
Door lock release triggering
time
Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
Key in 28.
Key in the door lock release
triggering time (in the range
01 to 15 seconds), e.g. 06
for 6 seconds.
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
NOTE. This function can only be used with
power suppliers with no centralized timers
(e.g. A/200R or VA/100.
01 set for manual
solenoid lock release control).
2
3
4
0
5
6
1
7
8
9
8
2
Flash detection mode
Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
Key in 20.
Press 0 for type approved
flash detection
or
1 for long flash detection.
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
1
0
0
2
IT200 24037311 02_09 24-02-2009 14:28 Pagina 32