Bpt IT/200 - Flash Interception; Type of Monitor to be Combined with the Telephone

PROGRAMMING
33
ENGLISH
Flash interception
Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
Key in 63.
Press 0 to disable flash
interception (connection to
XT/200 telephone)
or
1 to enable flash intercep-
tion (connection to generic
DTMF telephone).
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
1
0
3
6
Type of monitor to be combined
with the telephone
Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
Key in 64.
Press 0 when using XV/200
or XVC/200 monitor
or
1 when using IMT/200 or
IMTC/200 monitor.
NOTE. In systems with mixed extensions,
press 1.
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
1
0
4
6
IT200 24037311 02_09 24-02-2009 14:28 Pagina 33