EasyManua.ls Logo

Bpt IT/300 - Technical Features

Bpt IT/300
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
ENGLISH
TECHNICAL FEATURES
Supply voltage: 230V AC, 50 Hz.
Current demand: 6VA max.
Voltage output: 24V.
Call voltage active 50V/50 Hz.
Max. length of connecting cables for
power supplier, interface and internal unit:
250 m (6/10 telephone cable).
Amount of extensions on the same line: 5
max. (if there are any video unit, use a
distributor)
Reprimable electronic safety device.
Frequency deviation: according to CCITT
standards.
Monitor enabling for the duration of the
conversation.
Programmable flash (R) length.
Door lock release triggering time in the
range 1 to 15 s.
Local line connection even during power
outages.
Working temperature range: from 0 °C to
+35 °C.
Relative humidity: 90% with no condensa-
tion.
Insulation rating: II.
Dimensions: 8 DIN units, low profile
module.
Signal tone frequency: 375 Hz.
The unit is type approved according to stan-
dard CTR 21 and meets the requirements of
the EN 60950 standard relating to electrical
safety, and of the 89/336/EEC directive
amended with 93/68/EEC directive relating
to electromagnetic compatibility.
European approval issued by
BZT-ETS CERTIFICATION GmbH

Table of Contents

Other manuals for Bpt IT/300