X20 system
3.4.1.2.3 X20 shielding bracket
Order data
Order number Short description
Shielding bracket
X20AC0SF7.0010 X20 shielding bracket 66 mm 10 pcs.
X20AC0SF9.0010 X20 shielding bracket 88 mm 10 pcs.
Table 5: X20AC0SF7.0010, X20AC0SF9.0010 - Order data
The X20 shielding bracket is installed underneath the X20 system. The shield is pressed against the shielding
bracket using ground terminals from another manufacturer (e.g. PHOENIX or WAGO) or a cable tie.
2 lengths are available depending on the application:
Model number Length Application
X20AC0SF7.0010 66 mm
•
I/O modules
•
Power supply modules
•
Integrated I/O on X20CP13xx systems
•
Onboard interfaces on CPUs
X20AC0SF9.0010 88 mm
•
Interface modules
•
Bus controller modules
•
CPUs constructed in the form of an interface module
Installation / EMC guide 1.36 (April 2021) 19
To Next Page
Loading...