BR-Automation X20 - User Manual

Installation / EMC guide
X20 system - X67 system
Power Panels - Power supplies
Version: 1.36 (April 2021)
Order no.: MAEMV-ENG
User's manual
Translation of the original manual
All information in this manual is current as of its creation. We reserve the right to change the contents of this manual without notice. B&R Industrial Automation GmbH
is not liable for technical or editorial errors and defects in this manual. In addition, B&R Industrial Automation GmbH assumes no liability for damages that are
directly or indirectly attributable to the delivery, performance or use of this material. We point out that the software and hardware designations and brand names
of the respective companies used in this document are subject to general trademark, brand or patent protection.

Summary

Wiring Basics and Shielding Practices

X20 System Overview and Characteristics

X20 System Design Advantages

Highlights modularity, ease of maintenance, and industrial cabinet suitability.

X20 System Horizontal Installation

X20 Installation for High Vibration (4 g)

X20 Wiring and Shielded Lines

X20 Cable Recommendations and Shield Connection

X20 Shielding Bracket Installation Methods

X20 Cable Shield Plate Usage

X67 System Introduction and Characteristics

X67 System Features and Durability

Describes X67 modules' plastic housing, sealing, and status LEDs.

X67 System Installation Overview

X67 Wiring, Shielding, and Grounding

Power Panels: System and Installation

Power Panel Installation Guidelines

Covers retaining clips, tightening torque, and air circulation specifications.

Power Panel Wiring and Grounding Procedures

Power Supplies: Characteristics and Safety

Power Supply Features and Protection

Covers input voltages, temperature range, overload, and EMC protection.

ATEX and HazLoc Standards for Hazardous Areas

Maritime and DNV GL Certification Standards

Underwriters Laboratories (UL) Standards

BR-Automation X20 Specifications