Power Panels
6.4 Line filter
6.4.1 5AC804.MFLT-00
6.4.1.1 General information
To meet requirements regarding conducted interference emissions in supply lines for the maritime sector according
to the December 2019 edition of ship classification standard DNVGL-CG-0339, it is necessary to use B&R line filter
5AC804.MFLT-00 for T50 and T80 Panel series. For T Panel series a DNVGL Type Approved AC Power Supply
with location class EMC B must be used.
The line filter should be installed as close to the end device as possible; the supply line from the end device to the
line filter should be kept as short as possible.
6.4.1.2 Order data
Order number Short description Figure
Accessories
5AC804.MFLT-00 Line filter
Table 10: 5AC804.MFLT-00 - Order data
34 Installation / EMC guide 1.36 (April 2021)
To Next Page
Loading...